Coverart for item
The Resource 7th International Conference on Compressors and their Systems 2011

7th International Conference on Compressors and their Systems 2011

Label
7th International Conference on Compressors and their Systems 2011
Title
7th International Conference on Compressors and their Systems 2011
Creator
Subject
Genre
Language
eng
Summary
This book contains the papers presented at the 7th International Conference on Compressors and their Systems at City University London in conjunction with the IMECHE. This conference is the ultimate global forum for reviewing the latest developments and novel approaches in compressor research. It features contributions from equipment manufacturers, suppliers, users and research organisations; these papers present developments in air, gas and refrigeration compressors; vacuum pumps; expanders; and related systems and components. Papers cover the design, development and operation of a wide range
Cataloging source
EBLCP
Index
no index present
Literary form
non fiction
Nature of contents
dictionaries
7th International Conference on Compressors and their Systems 2011
Label
7th International Conference on Compressors and their Systems 2011
Link
http://libproxy.rpi.edu/login?url=http://www.sciencedirect.com/science/book/9780857092083
Publication
Note
Development of R744 two stage compressor for commercial heat pump water heater
Related Contributor
Related Location
Related Agents
Related Authorities
Related Subjects
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Cover; 7th International Conference on Compressors and their Systems 2011; Copyright; CONTENTS; FOREWORD; INTRODUCTORY PAPERS; Use of finite element and computational fluid dynamics analyses in the development of positive displacement compressor simulations; ABSTRACT; 1. INTRODUCTION; 2. SCREW COMPRESSOR DISCHARGE PORT; 3. SCROLL COMPRESSOR LEAKAGE; 4. RECIPROCATING COMPRRESSOR PRESSURE PULSATION; 5. CONCLUSIONS; ACKNOWLEDGEMENTS; REFERENCE LIST; Successful trials of turbo-boosting of positive displacement compressors; ABSTRACT; 1. BACKGROUND
  • 2. APPLICATION 1 -- TURBOCOMPRESSOR WITH PISTON COMPRESSOR3. APPLICATION 2: TURBOCOMPRESSOR WITH WATER-INJECTED SCREW COMPRESSOR; 4. CONCLUSIONS AND DISCUSSIONS; 5. ACKNOWLEDGEMENTS; 6. REFERENCES; TURBO COMPRESSORS; Design rationalisation for centrifugal turboblowers in the water industry; ABSTRACT; NOMENCLATURE; 1. BACKGROUND; 2. OPPORTUNITY; 3. THE DESIRED STATE; 4. SOLUTION; 5. IMPLEMENTATION; 6. RESULTS; New multistage axial compressor and chiller development for water as refrigerant; ABSTRACT; 1. INTRODUCTION; 2. FEASIBILITY STUDY; 3. DESIGN AND DEVELOPMENT OF THE AXIAL COMPRESSORS
  • 4. TEST OF COMPRESSOR AND CHILLER5. EXPECTED PERFORMANCE AND CHILLER DATA; 6. PERSPECTIVES; 7. REFERENCE LIST; Investigation of the gas flow in the vaneless diffusers of the centrifugal compressors; ABSTRACT; NOTATION; 1 INTRODUCTION; 2 CALCULATION PROCEDURE; 3 MODEL VERIFICATION; 4 CONCLUSIONS; REFERENCE LIST; The design of vaned diffusers of centrifugal compressors based on the given velocity distribution; ABSTRACT; NOMENCLATURE; 1 INTRODUCTION; 2 THE PROBLEM DEFINITION; 3 MATHEMATICAL MODEL; 4 THE DESIGN METHOD; 5 EXPERIMENTAL DATA; 6 CONCLUSIONS; REFERENCE LIST
  • OMNI turbo -- a high efficiency, nested two-stage impellerABSTRACT; 1. INTRODUCTION; 2. TWO STAGE NESTED IMPELLER COMPRESSION STAGE OMNI; 3. STAGE ANALYSIS; 4. MANUFACTURE OF IMPELLER AND ASSOCIATED PARTS; 5. A SINGLE SHAFT, HIGH SPEED MICRO-COMPRESSOR USING OMNI TURBO; 6. CONCLUSIONS; 7. REFERENCES; Optimisation of the high vacuum side channel pump; ABSTRACT; 1 INTRODUCTION; 2 DESIGN OF THE PUMP; 3 DESIGN OF A REGENERATIVE PUMP STAGE; 4 PERFORMANCE OF THE PUMP; 5 VARIATION OF THE ROTOR BLADE GEOMETRY; 6 VARIATION OF THE NUMBER OF BLADES; 7 MEMBRANE PUMP AS A BACKING PUMP
  • 8 MEASUREMENTS WITH DIFFERENT GASES9 EQUATIONS FOR THE CALCULATION OF REGENERATIVE PUMPS; 10 CONCLUSION; 11 REFERENCES; The TurboClaw┬« compressor for engine downsizing by twin-charging; ABSTRACT; 1 INTRODUCTION; 2 INNOVATION; 3 MOTOR AND DRIVE TECHNOLOGY; 4 EXPERIMENTAL VALIDATION; 5 ACKNOWLEDGEMENTS; 6 CONCLUSION; REFERENCES; Study of IGV and rotor interactions in a cooling axial fan; ABSTRACT; 1 INTRODUCTION; 2 STEADY SIMULATIONS; 3 UNSTEADY SIMULATIONS; 4 EFFECT OF AXIAL GAP; 5 CONCLUSION; REFERENCES; HEAT PUMPAND REFRIGERATION
http://library.link/vocab/cover_art
https://contentcafe2.btol.com/ContentCafe/Jacket.aspx?Return=1&Type=S&Value=9780857095350&userID=ebsco-test&password=ebsco-test
Dimensions
unknown
http://library.link/vocab/discovery_link
{'f': 'http://opac.lib.rpi.edu/record=b4170968'}
Extent
1 online resource (537 pages)
Form of item
online
Isbn
9780857095350
Media category
computer
Media MARC source
rdamedia
Media type code
c
Specific material designation
remote

Library Locations

    • Folsom LibraryBorrow it
      110 8th St, Troy, NY, 12180, US
      42.729766 -73.682577
Processing Feedback ...